How The Thought Emporium Built a Reusable Thermite Instant Phone Charger That Actually Works

Space probes have relied for decades on radioisotope thermoelectric generators that turn the slow decay heat of plutonium into steady electricity, keeping Mars rovers and the Voyager craft powered long after their solar panels would have failed. The Thought Emporium wanted something similar for a phone but could not buy plutonium, so they reached for a far more common mixture of aluminum powder and iron oxide. That combination is thermite, the same material used to weld railroad tracks, and in their hands it became the heart of a small box that can charge a handset after a controlled burn.
Previous experiments by the same group demonstrated that pure thermite is simply too explosive for any heat-capture system to function. The ultimate result is a pleasant whoosh, but it’s not ideal for attempting to harness the energy. However, adding around 40% quartz sand by weight works well. The sand melts and sticks the entire reactive mass together, slowing the burn to a constant two or three minutes. 300g of this mixture is placed in an alumina crucible, which is then placed in a steel box surrounded by more sand that has been treated with sodium silicate to make a solid ball of thermal mass.

On the outside, you have your aluminum cooling fins and Peltier plates attached between the shell and the fins, with a little of graphite foil to keep everything in contact. When you fire the sparkler to ignite the charge, the heat just soaks into the sand for approximately ten minutes, long enough to raise the voltage to around 2.5 volts, which is sufficient to light some strings of miniature LEDs. A simple regulator then raises the output to five volts, delivering one to two watts. Plug in a phone, and the charging symbol appears almost immediately. Efficiency isn’t particularly high; we’re talking one or two percent here, because the majority of the heat still escapes, and the Peltier plates we used weren’t exactly top-of-the-line.

However, the crucible’s design is what makes this device reusable. So, once the reaction is finished and the crucible is hot and shattered, you can simply lift it out and insert a new charge. The identical metal box and fin assembly can be used again. We created the entire thing with a laser cutter and welder, which handled the tough sections of steel and aluminum. What appeared to be a one-time experiment has shown to be reloadable.

Now, we know that there are chargers out there that burn wood or camp fuel and use similar thermoelectric panels, and they can produce equivalent or better power without all the extras. The thermite version is still merely an experiment demonstrating how to slow down a chemical reaction sufficiently to generate a useful temperature differential. It’s still not going to replace a power bank, and anyone attempting this at home should make sure they have lots of space and can stay away from the heat and molten metal that ensues. Nonetheless, watching your phone screen light up as a controlled thermite burn is a remarkable demonstration of how far careful engineering can push a reaction that would ordinarily just blow its top.
[Source]
How The Thought Emporium Built a Reusable Thermite Instant Phone Charger That Actually Works
#Thought #Emporium #Built #Reusable #Thermite #Instant #Phone #Charger #Works