First Leaks About Apple’s iPhone 20 Point to Curved Screens and Seamless Glass

Early iPhone 20 leaks indicate a screen that curves gently along every edge of the device. This wraparound approach could eliminate the typical bezels and give the front a continuous look with no visible breaks. When combined with a full glass back, the entire handset may feel like one smooth slab held in the hand.

According to reports, this is part of a larger plan for the 2027 release, which will commemorate the twentieth anniversary of the first iPhone. According to several supply chain insiders who use social media, curved display prototypes are currently in the testing phase. The early manufacturing stages may encounter some challenges, but it is evident that they are making considerable work toward developing the panels that Samsung will manufacture specifically for them.

People in the know mention a simpler rear camera configuration on some models; a prevalent theme is two lenses side by side in a small horizontal strip. We’ve heard that one of the new camera sensors is designed to pick up a lot more light and detail in images, offering users better overall results. Of course, ordinary models are expected to retain a small notch for the front camera, whilst a special edition may take it a step further by totally concealing the selfie camera and face recognition features beneath the display.

Battery life appears to be a significant improvement, as Apple is rumored to be transitioning to silicon-anode technology, which allows you to pack more energy into the existing battery while also stretching out the time between top ups. This transition away from lithium-based cells will not make the phone any larger or heavier. Inside the handset, we can expect to see the new, next-generation A21 processor paired with some fancy new high bandwidth RAM, which will aid in the performance of some of the more demanding AI technologies running on the phone. Some speculate that the chip’s manufacturing process may alter, although nothing has been proven as of yet.

It appears that the chassis may also change significantly. There is a lot of discussion about employing materials other than titanium and aluminum, such as new alloys that can withstand higher temperatures and are lighter. That will have to be weighed against the fact that the frame must hold the curved glass while remaining strong enough to handle daily wear and tear. Physical buttons may disappear and be replaced by touch-sensitive surfaces on the sides. These would function by recognizing pushes via vibrations, similar to a laptop trackpad, making it very easy to distinguish between a light or forceful touch.
[Source]