Plasma Channel Crafts Compact Bladeless Turbine for Silent Flight

Plasma Channel Bladeless Turbine Silent Flight
Jay Bowles of the popular Plasma Channel has been scratching his head over whether an airplane could be pushed by a thruster that’s both powerful and light enough to ditch the spinning blades. His latest version gets us closer than any of his earlier attempts have.



The high voltage between specially designed electrodes ignites the air and forces it out the back end, producing a continuous stream of thrust, which is significant since it eliminates the need for mechanical parts to wear out, rattle around, or be a noisy annoyance. It all began a few years ago, in 2022, when he first scribbled out the idea for a multi-stage setup in a cafe just outside of Seattle. He was convinced that this approach could revolutionize low-speed flight by eliminating all that heat and noise, as well as making the whole thing a lot easier to maintain.

Bambu Lab A1 mini 3D Printer + LED Lamp Kit, Ready-to-Use for Beginners | Beginner-Friendly Ecosystem...

Bambu Lab A1 mini 3D Printer + LED Lamp Kit, Ready-to-Use for Beginners | Beginner-Friendly Ecosystem…

  • A1 mini + LED Lamp Kit for Creative Light Projects: Bring your ideas to life with the included LED Lamp Kit. Simply print compatible lamp models and…
  • The Perfect 3D Printer for Beginners: A1 mini 3D Printer is designed to make 3D printing easy from day one with automatic calibration, simple setup…
  • Experience the Bambu Lab Ecosystem: Access MakerWorld’s huge library of ready-to-print models, manage prints through the Bambu Handy app, and enjoy…

Plasma Channel Bladeless Turbine Silent Flight
Earlier open-frame thrusters used stacked stages to accelerate the same column of air repeatedly. However, the most recent design has abandoned that method in favor of radial symmetry and ring-shaped electrodes, as this switch prevents the sharp edges from sparking wildly at high power levels. The positive electrodes are laser-cut bronze strips with a serrated edge, which provide 17% more power than a simple square-tooth pattern. Those components are made of 3D-printed resin parts produced by a Formlabs machine, coated with nickel conductive paint, and then electroplated with copper and nickel, all done in a homemade copper-sulfate and sulfuric acid bath. It turns out that nickel paint allows the copper to stick in seconds, whereas carbon paint requires around 15 minutes of stirring.

Plasma Channel Bladeless Turbine Silent Flight
A compact single-stage machine weighing 209 grams reached speeds of 4.1 m/s, or 9 miles per hour, while consuming only 50 watts on a dry day. This is also the quickest airflow recorded from any of his single-stage thrusters. Next up was a larger version that Jeremy Fielding had contributed to, which added a hollow bolt to allow the electrode gap to be adjusted for humidity, but it weighed a hefty 513 grams and pushed air at a relatively slow 3.6 m/s before shorting out so badly that its frame melted. Removing the threads for the following generation reduced the bulk to 484 grams, which was still lighter than the entire prior multi-stage Mark III, and produced 3.7 m/s at maximum power.

Plasma Channel Bladeless Turbine Silent Flight
When suspended on a pendulum, the 484-gram thruster swung about 24 mm to the side, resulting in approximately 25 grams of thrust, or about 5% of the thing’s own weight. According to Bowles, this is not awful considering it is a solid-state device. When compared to a standard fan, it is around 3% more efficient; however, if the humidity levels rise over about 78%, arcing occurs and the airflow just ceases. You won’t see any airplanes in the movie, but Bowles believes that with a little more weight reduction and 20% more velocity, it will be ready for some genuine flying tests.

Plasma Channel Bladeless Turbine Silent Flight
MIT presented a working ionic airplane in 2018, and Bowles has been progressively refining various similar ideas since then, including multi-stage thrusters, convergent airflow patterns inspired by leaf veins, and even an ionic wing. This latest creation is likely the most compact and sturdy thus yet, being totally solid-state and, aside from the gentle flow of air passing by, lovely and quiet. The key concern, however, is whether the numbers will scale up sufficiently to be useful in a plane.

Plasma Channel Crafts Compact Bladeless Turbine for Silent Flight

#Plasma #Channel #Crafts #Compact #Bladeless #Turbine #Silent #Flight

Leave a Reply

Your email address will not be published. Required fields are marked *